BM1 series cycloid hydraulic motor (can interchange with OMP series)
Features
BM1 motor is a small volume spool valve type motor.
Characteristic features:
1.Compact design,which provide small volume,high power and low weight.
2.Credible design for shaft seal, which can bear high pressure and be used in parallel or in series.
3.Direction of shaft rotation and speed can be controlled easily and smoothly.
4.Best combination of efficiency and economy in medium load applications.
Specifications
| Displacement (ml/r) |
50 |
63 |
80 |
100 |
125 |
160 |
200 |
250 |
315 |
400 |
Flow
(LPM) |
Continuous |
38 |
45 |
58 |
58 |
58 |
58 |
58 |
58 |
58 |
58 |
| Intermittent |
45 |
53 |
69 |
69 |
69 |
69 |
69 |
69 |
69 |
69 |
Speed
(RPM) |
Continuous |
698 |
663 |
685 |
560 |
456 |
356 |
285 |
236 |
176 |
145 |
| Intermittent |
853 |
775 |
820 |
671 |
548 |
426 |
341 |
282 |
210 |
173 |
Pressure
(Mpa) |
Continuous |
12.5 |
12.5 |
12.5 |
12.5 |
12.5 |
12.5 |
11 |
10 |
9 |
9 |
| Intermittent |
14 |
14 |
14 |
14 |
14 |
12.5 |
12.5 |
12.5 |
12.5 |
11 |
Torque
(N·m) |
Continuous
|
74 |
87 |
124 |
155 |
194 |
227 |
282 |
302 |
365 |
456 |
| Intermittent |
86 |
98 |
141 |
176 |
221 |
260 |
318 |
383 |
406 |
521 |
1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure.
2. Motor should not work under the highest pressure and the maximum speed.
3. The running time should not exceed 10% under intermittent working conditions.
4. The maximum working temperature is 80°.
5. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa. A leaking pipe is needed when exceeding.
6. One hour running time under 40% of maximum working pressure is recommended before full capacity working.
7. Recommending N68anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.
